Skip to content Skip to footer

6 Mistakes to Avoid Regarding Generator Operation and Service

Generac generator

Generators can provide backup power in the event of a blackout, but you need to properly operate and maintain your generator to ensure that it works without any hiccups.

Generator breakdowns can be prevented through proper operation and maintenance. Here we have shared some tips to ensure that you don’t make mistakes when servicing and operating your generator.

Mistake #1: Not Servicing the Generator Regularly

Generators require regular maintenance. You need to contact a professional technician to service the generator regularly.

An experienced technician will test the fuel, change filters and fluids, burn off unburned fuel, and replace the spark plug if required. In addition, the technician will also inspect the engine and ensure that the generator starts properly.

Routine servicing of the generator will ensure that minor problems are resolved on time. It will reduce the risk of serious faults that are costly to address.

Mistake #2: Not Hiring Experienced Technicians

Another mistake regarding servicing the generator is not hiring experienced technicians. You should not let inexperienced personnel service your generator. Repair and maintenance of generators require expert skills.

Inexperienced technicians can cause damage to the generator due to not using proper techniques for servicing the generator. You can end up paying a great deal more in generator repairs if you try to save money by hiring non-specialists for servicing your generator.

Mistake #3: Engine Oil Quality

You must always use top-grade engine oil for your generator. Using the wrong grade engine oil will not result in proper lubrication of engine parts. It can result in premature wear and tear of the engine parts. Permanent damage can occur due to using cheap, low-quality engine oil for your generator.

Consult your generator manual to know about the right quality of the oil. The simple step can save you a lot of headaches and cost in the long run.

Mistake #4: Not Powering On and Off Properly

You must use the right technique when turning the generator on and off. Before you turn on the generator, you should plug in the extension cords. Once you turn on the generator, you should add loads to the generator with the device consuming the most power first.

When turning off the generator, you should shut down the device taking the most power first. When all the load is turned off, you should shut down the generator.

Mistake #5: Operating the Generator Inside the House

Never turn on the generator inside the house. The exhaust of the generator contains carbon monoxide gas that is deadly, That is why you should always operate the generator in a well-ventilated area. Make sure that the generator is away from the doors and windows of the house.

Consider giving at least 5 feet of clearance on each side when operating the generator. Don’t start the generator in a confined space as it increases the risk of carbon monoxide poisoning.

Mistake #6: Generator Couldn’t Take the Load

Another mistake during operating the generator is turning of too much load at one. You must make sure that the generator can handle the load. Putting more load on the generator that it can handle can damage the generator.

The circuit breaker will trip which will prevent the generator from turning on due to tripping. To avoid this problem, you should unplug all devices from the extension cord and then turn on the items one by one while not overloading the generator.

Generac Superstore deals with the sale and service of residential and industrial generators. We offer generator repair and maintenance services in Huntsville. Contact us today for the sale or service of Generac generators.

LICENSED, BONDED & FULLY INSURED

Current Electrical © 2024. All Rights Reserved.  | Site by BrightEyed Brands

Visit our showroom

1068 Hwy 231, Laceys Spring, AL 35754
Just south of the Tennessee River Bridge

Hours: Monday – Friday 7:30am – 4:00pm