Fall is the best time for standby generator maintenance in Huntsville, Al. Maintaining your generator during the fall season will ensure that it will perform perfectly well into the winter season and beyond. Proper maintenance will ensure that the backup power supply won’t fail in case of a power outage.
Here are five important standby generator maintenance tips to ensure that it works without smoothly without any problems.
1. Check Air Filter
An air filter is an important component of a generator. A filter prevents the build-up of dirt, dust, and other airborne pollutants. A dirty and clogged filter will negatively affect the performance of the generator, preventing proper airflow which will result in damage to the internal components of the generator
A professional technician will check the filter, and if the filters are dirty; the technician will clean or replace the filter as appropriate. A clogged filter will require replacement if it is worn out and damaged. It is important to replace worn out filters as it can result in damage to internal components of the generator.
2. Check Oil
An oil change is necessary after regular intervals. Engine oil should be changed after every 30 to 50 hours of usage. For new generators, the engine oil should be changed after 20 hours to remove assembly lube from the system.
Changing the engine oil is important otherwise the engine can get damaged. A regular oil change will ensure that the engine remains in good condition. A technician will inspect the engine oil during the routine fall maintenance and change the oil if deemed necessary.
3. Test Run
A generator will lose efficiency even if it is not in use. It is important to test the standby generator after every three to four months. The generator should be turned on for about half an hour to ensure that it works perfectly.
A test run will also charge the generator battery. This will ensure that the generator will start without a problem. Again a technician will carry on the test run and look for any trouble. In case of an issue, the technician will perform the required repairs.
4. Check Generator Vents
Fall is popular due to the beautiful foliage. But the tree branches and twigs can clog up the vents of the generator. The vents should be clear of grass, leaves, other types of debris.
Clogged vents can lead to overheating of the generator. This can cause the generator to shut down. Moreover, it will block the air from getting outside. The trapped carbon monoxide will be forced into the property creating a deadly situation.
A technician will thoroughly inspect the generator vents to ensure that they are clear of any debris. Clearing away the debris will allow the generator to perform smoothly without any issues.
5. Inspect Leaks
A professional generator repair technician will also look for oil leaks during regular fall maintenance. A leak can be either due to overheating or a damaged pipe that supplies oil to the engine. The technician will diagnose the problem and perform the required repairs.
Standby generator maintenance is always a good investment. But it is particularly a wise decision during the fall. With the winter season approaching, you need to keep the generator in good condition.
Generac Superstore offer reliable and affordable generator service in Alabama and Tennessee. We provide professional generator maintenance in Huntsville and Birmingham, AL, and Nashville, TN. Contact us today at (855) 880-1880 for residential or commercial standby generator maintenance and repair services.