Contractors often work in remote areas where there is little to no power Which is why a remote construction work site requires portable backup power, allowing those on the site to use power equipment.
But you should not just select any generator for the construction site. In this blog post, you will learn how to select the right generator for a building site.
1. Select the Right Size Generator
The foremost task when selecting a generator for the building site is the size of the generator. You should select a small backup unit with power up to 5.5Kw if you want to power one or two outdoor equipment.
Small backup units are generally portable. You can carry them around with you at the work site. The generators mostly run on gasoline.
If the construction worksite requires the use of heavy-duty equipment, you should select generators with a power range between 5.5Kw to 10Kw. The semi-commercial generators are best for running ten or more power tools at the same time. These generators can be gasoline or diesel generators.
For large construction sites, you should consider selecting commercial generators with a power output of more than 10Kw. These generators mostly run on diesel fuel. Diesel generators can run longer hours before requiring repairs. The generators also last longer as compared to gasoline-powered generators.
2. Consider Average Output Capacity
When selecting a generator size, you should consider the average output capacity. The trouble is that most manufacturers quote maximum power output. You should enquire about the average load that the generator can handle by contacting the manufacturer.
Keep in mind that a larger size generator is better than using a smaller generator. A generator that runs about 60 percent of its optimal capacity will run more efficiently than a generator that runs at 80 percent optimal capacity.
- Mobile vs Fixed Generators
Another important consideration when buying a generator is its mobility. If you want a generator to power the entire work site, you should consider a fixed generator as it will be less costly.
Mobile generators are recommended if you want to use multiple generators to power the equipment used at the work site. These generators are mounted on wheels that can be carried around the site. The generators are much more expensive as compared to fixed generators.
4. Additional Features
You should consider extra features when selecting a generator for the work site. A generator with a fuel gauge is an important feature as it will show the fuel remaining inside the tank. You will have no way of knowing how much fuel is left without a fuel gauge.
Another important feature is the automatic idle control. Manufacturers also market this feature as Smart Throttle or Eco Throttle. The feature can save you a lot of costs since the generator operations are adjusted depending on the load.
A fuel shutoff valve is also a must-have feature in a generator. With this feature, you don’t have to remove all the fuel inside the generator when not using it for a long time. The feature is also useful when transporting or maintaining the generator.
You should also consider a generator that has an automatic low fuel shutoff feature. Low fuel can damage the internal components of the generator engine. The automatic low fuel shut-off feature will minimize the wear and tear of the generator.
Conclusion
Building contractors need to consider the power requirements when selecting a generator. The best generator for a construction site depends on the load requirements.
Generac Superstore is a reliable name when it comes to commercial and residential generators. You should contact us today for sales in Huntsville, Birmingham, AL, and Nashville, TN.