Generators can help users minimize electricity related inconveniences. They primary purpose is to provide backup power during emergencies. With the help of a generator business operations won’t be affected in case of power outages. Moreover, homeowners can remain warm and cozy inside their homes, irrespective of the season due to continuous heating and cooling.
While Generac generators are invaluable for homes and businesses, they are not perfect. Generators malfunction occasionally. You must know how to troubleshoot generators so you can tell the generator repair technician what’s wrong with your backup power equipment on the phone.
1. Battery Problem
Most modern generators have a battery. The battery provides power when turning on the generator. If your generator does not start, you should check the battery. Sometimes a battery fails to provide power due to loose or dirty connections. You can easily fix this problem by cleaning and tightening the wire connection at the battery terminals.
Another issue with a generator battery is that the charging level may be low. You should use a battery tester to find out the charging level. Charge the battery if the charging level is low. Consider replacing the battery if the battery charging level gets low frequently.
2. Coolant Leak
Coolant leaks can develop due to continuous usage of the generator. The coolant hoses can get damaged due to wear and tear, resulting in leaks. You must address the leak to prevent further damage to the generator.
You must check the coolant hoses at least once a year. Visually inspect the hose to look for the source of the problem. The coolant hoses are not expensive. You can install the hoses yourself without calling a professional. After installing the hose, you must flush the existing coolant and add a new one.
Consider replacing the coolant after a few years. You should look at the manufacturer’s recommendations about replacing the coolant of your generator. Regular flushing of the coolant will result in optimal performance and prevent generator failure.
3. Faulty Block Heater
Block heaters warm up the coolant, allowing it to circulate inside the engine. It keeps the engine block warm, preventing oil from becoming thick. In addition, it also helps the generator to start during colder seasons. The heaters maintain a consistent temperature of the coolant thereby reducing wear and tear of the engine parts.
But it’s important to note that block heaters fail given enough time. You must call a professional generator technician to diagnose the problem. An experienced technician will use special equipment to test the block heater. In case the block heater is faulty, it needs to be replaced.
4. Inadequate Fuel
A generator may also fail to start due to inadequate fuel. The fuel may not be enough to start the generator. You must inspect the fuel level to make sure that there is enough fuel to power the generator.
Make sure that you top up the fuel regularly. Don’t allow the fuel to run out completely. This is important since air can get inside hoses and other parts. Getting the air out of the system is time-consuming and costly.
Always check the fuel level indicator before turning on the generator. But sometimes the fuel level indicator becomes faulty. You will not be able to know the right level of fuel in case of a faulty fuel level indicator. A license generator technician will check the fuel level indicator during routine maintenance and replace it if necessary.
Generac Superstore deals with residential and industrial generators. We offer sale and repair services of Generac generators for homes and offices in Huntsville. We provide regular maintenance services to ensure that your generator performs optimally. Contact us today to buy the best quality generator that meets your power requirements.